CM's machined aluminum housings replace stock spin-on filters and accepts CM's proprietary high flow synthetic oil filter elements. Designed to withstand the highest pressure surges and rough duty service. These blue anodized housings have a removable bottom threaded cap. Element replacement is done through the bottom cover which is threaded into the body. CM spin-on oil filters are offered in several different combinations of mounting thread and sealing gaskets, along with two lengths to fit most engine applications. Each housing comes complete with all the necessary O-rings and gaskets required, and one 8 micron element.
CM 25-200 series SPIN-ON OIL FILTERS are 4-1/4" long, 3-1/4" in diameter and accept CM's -15 2-5/8" high 8 micron element. - $99.60 each
CM oil filters part numbers may be selected by specifying the O-ring diameter, thread size and length. Please refer to the chart below.
Thread
O-Ring
4 1/4
6 1/4
13/16-16
18mm
13/16-16
3/4-16
20mm
22mm
1-12
3 1/4
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
2-5/8
25-242
25-252
25-232
25-262
25-282
25-292
S.O.
25-442
25-452
25-432
25-462
25-482
25-492
S.O.
S.O. = Special order only.
***Most in-line and remote filters have changed.*** The ports now use a -12 O-ring type fitting. We do offer fittings to convert to -6, -8, -10 and -12 AN lines. Please call if you have questions.
CM's machined aluminum housings replace stock spin-on filters and accepts CM's proprietary high flow synthetic oil filter elements. Designed to withstand the highest pressure surges and rough duty service.
